9V Power Jack; Changing The Battery; Warranty Information - Electro-Harmonix NANO POG Quick Start Manual

9V Power Jack – Although the NANO POG accepts 9V Batteries, EHX supplies
your NANO POG with an Electro-Harmonix 9.6DC-200 power supply. Plug the
output of the supplied AC adapter into the 9V power jack located at the top of
the NANO POG. The NANO POG draws 25mA at 9VDC with a center negative
plug. The NANO POG accepts Boss ® and Ibanez ® style AC Adapters.

- CHANGING THE BATTERY -

To change the battery, remove the four screws on the bottom of the NANO POG
and take off the bottom plate. The battery clip is in the bottom of the unit. Take
care not to touch the circuit board while changing the battery in order to avoid
damaging a component.

WARRANTY INFORMATION

- -
Please register online at http://www.ehx.com/product-registration or complete and return
the enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or
replace, at its discretion, a product that fails to operate due to defects in materials or
workmanship for a period of one year from date of purchase. This applies only to original
purchasers who have bought their product from an authorized Electro-Harmonix retailer.
Repaired or replaced units will then be warranted for the unexpired portion of the original
warranty term. If you should need to return your unit for service within the warranty
period, please contact EHX Customer Service at 718-937-8300 or info@ehx.com for a
Return Authorization Number. Along with your pedal, please include a brief description of
the problem as well as your name, address, telephone number, copy of your receipt, and a
check or money order.
United States - $12
Canada - $15
Europe and other countries - $25
Ship to:
Electro-Harmonix
C/O New Sensor Corporation
55-01 2nd Street
Long Island City, NY 11101
Attn: Service Department
Please make checks/money orders payable to New Sensor Corporation.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at info@ehx.com
2