Advertisement
Button Plugs (3 pcs)
Plastic
Grille
Insert
Transfer the plastic grille insert to
the gap on the opposite side.
Figure 4
5. Install new left hand top hinge
(prepackaged inside unit) at the left hand
cabinet corner. (See Figure 5.)
Figure 5
6. Remove three screws that hold the bottom
hinge to lower end of cabinet. (See Figure 6.)
Figure 6
Upper Left Hinge
Screws
Hinge
INSTALLATION
7. Unscrew hinge pin from bottom hinge and
transfer to threaded hole on opposite side.
(See Figure 7.) Reinstall bottom hinge in
left hand corner of cabinet using same
three screws removed in Step 6.
Pin
Screws
Hinge
Figure 7
8. On bottom edge of door, transfer door
stop bracket and bushing to holes on
opposite side. (See Figure 8.)
Step 8:Remove the screw
and the block
chart 3)
Step 9:Change the hinge axis
from the right hole to left hole(see chart 4
Figure 8
9. Place bottom left hand corner of door onto
lower hinge then tilt top of door back to
clear edge of top hinge. Make sure door is
level and it seals properly against cabinet
then insert hinge pin through hole in top
hinge and into door busing. Securely
fasten with Phillips screwdriver.
(See Figure 9.)
Top Hinge
Figure 9
10. Reinstall toe grille using same screws
removed in Step 4.
,then set them on the left side.(see
Stop
⑦
⑧
Bracket
⑥
Bushing
Hinge Pin
7
Hide quick links:
Advertisement
