Silent Messaging (Busy Station) - Toshiba Starta DK Digital Telephone User Manual

Digital business telephone systems (includes lcd, add-on module, and direct station selection console)
Table of Contents

Advertisement

7. Press
8. Press
9. Press .
To receive a notification message
Press
To cancel the message from the telephone that set the message
Press [PDN] and dial
message.

Silent Messaging (Busy Station)

An audible tone and an LCD message can be sent to an LCD station that is busy. The busy
station can return a message to the calling station's LCD. The two stations may continue this
procedure to carry on a "silent" conversation. Soft Keys must be OFF (
sending and receiving stations for this feature to operate.
To send a message to a busy station
1. When you receive a
busy tone, press
2. Enter the message
number.
3. Press
Strata DK Digital Telephone 5/99
.
.
At the destination station, the LCD
displays the originating station
number and the
.
, where XXX is the [PDN] of the telephone that set the
=[DN]
210
+ .
Station message (10~19) and system
message (60~99). The LCD displays
the message. (This assumes the
message is already stored in memory.)
.
The destination station beeps four
times and the message displays for 30
seconds, or until you hang up.
MODE NO.?
LED flashes.
OVER TO ST210
MSG NO?
LCD Operation
Messages
MSG NO.?
SENT 207M
+
) at the
95

Advertisement

Table of Contents
loading

Table of Contents