Table of Contents
Advertisement
LCD Operation
Soft Keys
Soft Key Display
Abbreviated Soft Key feature prompts display on the LCD above the
Control buttons (
example, you would press
and
CONF
If the Soft Key feature is activated at your station, incoming call information does not display
on your LCD while your station is busy. To display this information, you must either
disconnect the existing call or place it on hold.
How to Use Soft Keys
This section provides an example of how to use Soft Keys to make a Conference call by
adding a station to an outside call. See
that can be accessed with Soft Keys.
Example: Using Soft Keys to Make a Conference Call
While on an outside call (
prompts
ABR
not appear, then this feature was not assigned in system
programming).
Thirty seconds after the first digit of the telephone number is dialed,
the display changes to
incoming call, the
answer the call.
To Use Soft Keys to Make a Conference Calll
1. While on an outside
call, press
(
) to initiate the
Conference.
(Optional) You can
press
RTRN
to terminate the
operation and return
to the outside call.
80
,
, and
for the
for
.
PGE
) you initiated, your LCD displays the
LINE 3
,
, and
during the first 30 seconds (if
CONF
PGE
,
, and
TRNS
CONF
prompt appears immediately when you
TRNS
The outside call is placed on-hold.
CONF
(
)
). In the following
function,
TRNS
"Soft Key Prompts" on Page 82
ABR
. If the call is an
PGE
TALK ON LINE 2
TRNS
CONF
PGE
for
for a list of features
TALK ON LINE 3
does
ABR
CONF
PGE
TALK ON LINE 3
TRNS
CONF
PGE
LINE OR STATION?
LINE
STA.
RTRN
Strata DK Digital Telephone 5/99
Advertisement
Table of Contents
