Table of Contents
Advertisement
LCD Operation
Memos
To return to a busy station message after receiving a busy station message
1. Press
2. Enter the message
number.
3. Press
Memos
Speed Dial Memos
You can store names (12 characters max.) for each of 40 station speed dial numbers. The
memo pad of names can be scrolled to select the appropriate party. The station must be
enabled via system programming for LCD message memory.
To program Speed Dial names and numbers
1. Press
2. Dial a station speed
dial code.
3. Press
96
Your LCD confirms the message was
sent.
+ .
Station message (10~19) and system message (60~99). The
LCD displays the message. (This assumes the message is
already stored in memory.)
.
Your LCD confirms the message was
sent.
, then
.
See
Table 15 on page 111
dial codes.
.
If a name was previously stored on
this code, it appears on the top line.
OVR TO ST210
MSG NO?
MSG SEND
for speed
# * 10 SPEED DIAL
*10 NAME
SPEED DIAL
Strata DK Digital Telephone 5/99
MSG SEND
Advertisement
Table of Contents
