Warranty Information; Return For Repair Policy - General CA10 User Manual

If the instrument has been exposed to extreme temperatures, allow several
hours for it to acclimate to your local conditions before using it.
Do not open the housing of the unit. Doing so voids its limited warranty and
could disable its safety circuitry.
You may clean the housing of the CA10 with a soft, clean cloth and water or a
mild detergent. Never use benzene, alcohol, acetone, ether, ketone, paint
thinner, gasoline or an organic solvent. After cleaning, dry the CA10 thoroughly
with a clean cloth before using it again.

WARRANTY INFORMATION

General Tools & Instruments' (General's) CA10 AC Circuit Analyzer is warranted
to the original purchaser to be free from defects in material and workmanship
for a period of three years. Subject to certain restrictions, General will repair or
replace this instrument if, after examination, the company determines it to be
defective in material or workmanship.
This warranty does not apply to damages that General determines to be from
an attempted repair by non-authorized personnel or misuse, alterations, normal
wear and tear, or accidental damage. The defective unit must be returned to
General Tools & Instruments or to a General-authorized service center, freight
prepaid and insured.
Acceptance of the exclusive repair and replacement remedies described herein
is a condition of the contract for purchase of this product. In no event shall
General be liable for any incidental, special, consequential or punitive damages,
or for any cost, attorneys' fees, expenses, or losses alleged to be a
consequence of damage due to failure of, or defect in any product including,
but not limited to, any claims for loss of profits.

RETURN FOR REPAIR POLICY

Every effort has been made to provide you with a reliable product of superior
quality. However, in the event your instrument requires repair, please contact
our Customer Service to obtain an RGA (Return Goods Authorization) number
before forwarding the unit via prepaid freight to the attention of our Service
Center at this address:
Remember to include a copy of your proof of purchase, your return address,
and your phone number and/or e-mail address.
General Tools & Instruments
75 Seaview Drive
Secaucus, NJ 07094-1806
212-431-6100
15