Siemens SIMATIC S7-1200 CP 1242-7 V2 Application Example page 18

4 Configuration and Settings
4.2 Configuring the TCSB V3
No.
Fill in the parameters "Project name", "Project number" and "Server password" of
5.
the project.
Click on "Create".
Note:
The server password is required for the TeleService access.
In this example, the server password is "Teleservice".
"Save & activate" the configuration to activate the configuration data for connection
6.
establishment.
7. Create a new connection for station 1 by following the steps below:



The new connection appears in the object area.
TeleService with TCSB
Entry-ID: 56720905, V1.0,
In the navigation pane, select a project for which you want to create a new
connection.
In the command bar, select the required connection type from the "Connection
type" drop-down list.
In the object pane, select the "Add" button from the command bar. Select the
CP 1242-7 V2.
10/2016
Action
18