4 Configuration and Settings
4.2 Configuring the TCSB V3
No.
8.
Save the changes and activate the project.
Select the connection and in the object pane, select the "Connections" tab.
9.
In the parameter area, various parameter groups are displayed for this connection.
In the "General" parameter group, enter the parameters for the remote station:
10.
Note:
The parameters assigned here must be identical with the parameters in the STEP 7
V13 project.
Under "TCSB system > "TCM" tab > General > Address TCM 1", configure the IP
11.
address and the port of the Telecontrol server.
(„TCSB system > „TCM" tab > General> Address TCM 1").
12.
Save the changes and activate the project.
TeleService with TCSB
Entry-ID: 56720905,
V1.0,
Station name
Station number
Telecontrol password: Teleservice
10/2016
Action
19