Notes On Rectifying Malfunctions; Connection Via Usb Cable - HomeMatic CCU2 HM-Cen-O-TW-2 Series Installation And Operating Manual

11 Notes on rectifying malfunctions

11.1 Connection via USB cable

If you are using your Central Control Unit without a network con-
nection, you can connect the device to your PC using a USB cable.
Additional device drivers are required to do this. To install these,
proceed as follows:
• First connect your Central Control Unit to your PC using the USB
cable supplied.
Power
Internet
Info
• The Central Control Unit automatically opens in Explorer as a
drive.
• Open the "setup.exe" installation file and install it.
Notes on rectifying malfunctions
45