Starting The Webui User Interface For The First Time; Calling Up Webui - HomeMatic CCU2 HM-Cen-O-TW-2 Series Installation And Operating Manual

9 Starting the WebUI user interface for the
first time
9.1

Calling up WebUI

The Homematic WebUI user interface is software-based and easy
to use. You need it to carry out the following tasks:
• Controlling and configuring Homematic devices
• Connecting Homematic devices directly to other devices
• Using Homematic devices in the central programs
You access the user interface via a web browser (see Section 7).
If you do not have a network with a DHCP server, you can
set the IP address of the Central Control Unit via the USB
connection. Without a network, the Central Control Unit can
only be used via USB. For more information on setup using
a USB connection, refer to Section 10, "Notes on rectifying
malfunctions".
• Once the Central Control Unit has been connected to the PC, the
router and the power supply, open your web browser.
• Please enter the IP address of your Central Control Unit into the
browser (see „9.2 IP address of your Homematic Central Control
Unit" on page 38).
You will then be taken to the homepage of your WebUI.
Starting the WebUI user interface for the first time
37