TEC EO1-11115 Owner's Manual page 66

Electronic cash register
Table of Contents

Advertisement

NOTES: 1. A maximum of 24 hourly ranges may be set.
2. Do not set an hourly range across 24:00, such as "from 23:00 to 1:00". Such setting does not cause
an error in programming but the sales data will not be processed into that hourly range.
3. If an hourly value of more than 23 or a minute value of more than 59 is set, it will not result in an
error but the data will not be processed into that hourly range.
4. To change the table of hourly ranges once set, partially or entirely, do the entire setting operation
over again.
5. To clear the hourly range table once set, operate in SET mode:
7
Programming Example:
Hourly Range Table
up to 8:00
8:00 to 9:00
9:00 to 10:00
10:00 to 13:00
13:00 to 16:30
16:30 to 18:00
Selecting Print/Non-print Items on Reports
The following table shows the items on reports that can be programmed to be printed or non-printed
according to your store's requirements. For further details of programming, refer to Chapter "16. Sys-
tem Option Setting" on page 69. If you have started operations on the register without this program-
ming operation performed, print or non-print status of each item is determined by the "Initial Status" in
the following table. It is recommended, therefore, to change Print/Non-print status of each item after
once taking all the reports.
GT (Grand Total)
Sum of Negative Departments
Sum of All Departments (except Other Income Depts)
Sum of Other Income Departments
Net Sale With Taxes
Net Sale Without Taxes
Receipt Consecutive No. on Journal and every Receipt
Receipt Consecutive No. Resetting
@/FOR
0
Key Operation
Control Lock: SET
@/FOR
7
8
9
1
0
1
3
1
6
1
8
AT/TL
Item
#/CID
#/CID
0
0
#/CID
0
0
#/CID
0
0
#/CID
0
0
#/CID
3
0
#/CID
0
0
Initial Status
Before Change Address No. - Bit No.
Print
Non-Print
Non-Print
Non-Print
Print
Non-Print
Print
Non-resettable
- 60 -
MA-186-100 SERIES
AT/TL
Thank you
Call again
05.- 28.- 9 7
0.7
0 8 - 0 0
0 9 - 0 0
1 0 - 0 0
1 3 - 0 0
1 6 - 3 0
1 8 - 0 0
0 01.0
0 8 - 5 1
System Option
Address 1 - Bit 4
Address 1 - Bit 6
Address 11 - Bit 2
Address 11 - Bit 3
Address 13 - Bit 1
Address 13 - Bit 2
Address 15 - Bit 2
Address 15 - Bit 3
EO1-11115
Page
71
77
78
80

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tec ma-186Ma-186-100 series

Table of Contents