TEC EO1-11115 Owner's Manual page 51

Repeat Entry
Preset-price PLU
PLU Code
Open-price PLU
PLU Code
NOTE: A negative PLU entry cannot be repeated.
Quantity Extension (Multiplication)
Preset-price PLU
. . .
Quantity
Open-price PLU
PLU Code
NOTES: 1. Quantity... Max. 6 digits (Max. 3 digits
for integer + max. 3 digits for decimal.
Use the [.] key if a decimal portion is
contained.)
Unit Price ... Max. 6 digits
Product (result of multiplication) ... Must
not exceed 7 digits.
2. The decimal portion of the Quantity en-
try is processed down to the 2 digits be-
low the decimal point. The fraction
rounding at this time is fixed to ROUND
OFF.
3. You can select the rounding process of
the fractions of the product —ROUND
OFF (initial setting), ROUND UP, or
ROUND DOWN. (Refer to Chapter "16.
System Option Setting, Address 2 -
Bits 1 and 2" on page 72.)
PLU
To repeat
PLU
@/FOR
If an error occurs here:
Possible cause of error:
• Exceeding the digit limit
PLU
If an error occurs here:
Possible cause of error:
• Exceeding the digit limit
PLU
. . .
AMT
Price
PLU
PLU Code
If an error occurs here:
Possible cause of error:
• Product exceeding 7 digits.
. . .
@/FOR
Quantity
PLU Code
If an error occurs here:
Possible cause of error:
• Exceeding the LC of the link Department
• Product exceeding 7 digits.
- 45 -
MA-186-100 SERIES
20.0
10.0 0
20.0
10.0 0
AMT
To repeat
Check the Quantity.
. . .
Unit Price
4. X
10.0 0 @
20.0
40.0 0
Check the Unit Price.
See Listing Capacity Open.
Check the Quantity and Unit Price.
EO1-11115
AMT
Quantity
Unit Price
Product