Assembly Instructions Accessories - Etac Transit lll Manual

12:1 Padded cover, armrest
The detachable armrest can either be
supplemented with, or ordered com-
plete with, a padded or gel cover.
They are manufactured in dark grey
plush, or alternatively black Dartex,
and they are washable.
12:2 Tray
The tray is transparente, with a recess
to fit round the body. It is mounted
on long armrests using Velcro straps.
The height is adjusted along with the
armrests.
12:3 Positioning belt
The positioning belt is in two parts, is
adjustable in length and has a snap-
lock. It can be mounted either on the
backrest joint (A) or in the holes just
in front of the backrest joint (B), above
the wheel mounts. Assembly instruc-
tions are supplied with the belt.
(!) Ensure that the user does
not slide forwards in the seat
as this can lead to the belt
impairing the supply of blood
to the hip/waist area.
12:4 Heel strap
The heel strap is mounted on foldable
footrests. It can be adjusted length-
wise. Hole instructions for fitting
the screw are on the bottom of the
footrest. Front or back "corner" can
be used. Make the hole by drilling
(6 mm). Assembly instructions are
supplied with the heel strap. Cannot
be used in combination with extended
footrest.

12 Assembly instructions accessories

(!) The padded cover makes
the armrest 1.5 -2 cm higher.
(!) Fitted only with long
armrests
The belt is to be used solely for
positioning in the wheelchair.
It must not be used as a
substitute for a safety belt in
a car.
We recommend the front
position (B).
Tools: 10 mm spanner.
(!) Adjust the length so that
the foot is placed in the centre
of the footrest and does not
come into contact with
the castor wheels:
20
A
B