Ceiling Bracket - Hunter Caribbean Breeze Instructions Manual

Ceiling Bracket

OFF
Make sure all four (4) bumpers
are still attached.
For angled ceilings, point
opening toward peak.
To avoid possible electrical shock, before
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
Use wood screws Use machine screws
(included) when securing (provided with outlet
to support structure with box) when securing to
approved electrical outlet existing ceiling fan-rated
box. Drill 3.5 mm pilot outlet box. Make sure
holes in support structure it is securely installed
to aid in securing ceiling and is acceptable for fan
bracket with hardware support of 31.8 kg or less.
found in the hardware
bag.
Note: Do not mount ceiling fan
to a plastic outlet box.
5
MD500-01 • 05/21/14 • © Hunter Fan Company
contatobrasil@hunterfan.com
Use concrete anchors (included)
when securing to support structure
with approved outlet box in a concrete
ceiling. Drill 8 mm pilot holes in
support structure. Hammer the M6
expansion anchors into the holes until
the ends are flush with the ceiling.
Install the washer, isolator, and nut
found in the hardware bag to
the expansion anchors.
Refer to warning w.1 on pg. 2