Hunter Caribbean Breeze Instructions Manual page 14

Blades
contatobrasil@hunterfan.com
Remember the screws that
you kept after removing the
shipping blocks (page 6)? You
need them for this step.
Lightly attach the blade irons to the
Secure each blade to a blade iron with
motor with the blade iron armature
screws found in the hardware bag.
screws, then securely tighten after both
screws are attached.
Note: You need ten screws to complete
this step. Additional screws might be
found in the hardware bag. Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
12
scratching. Cleaning agents may damage the finishes.
MD500-01 • 05/21/14 • © Hunter Fan Company