Hunter Caribbean Breeze Instructions Manual page 16

No Light Kit Option
Connect the plugs from the upper and
lower switch housings. Make sure to line up
the colored markings on the connectors.
Lift the lower switch housing until its
screw holes are aligned with the screw
holes in the upper switch housing. Install the
three switch housing screws, found in the
hardware bag. Tighten all three screws.
14
MD500-01 • 05/21/14 • © Hunter Fan Company
contatobrasil@hunterfan.com
Attach the pull chain pendant to the short chain
coming from the switch housing.
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light fixture falling.