Download Print this page

Using Esptool - Espressif ESP-WROVER-KIT Getting Started Manual

Table of Contents

5.3.2. Using esptool

Users need to conﬁgure the serial port before compiling and downloading BIN ﬁles. Serial

port conﬁguration is not required if the Flash Download Tool is used to ﬂash the BIN ﬁles on

to the ESP-WROVER-KIT. However, other important system parameters may be set via

menuconfig. Please complete this step before generating BIN ﬁles.

1. Enter make menuconfig:

make menuconfig

Then, the following interface is displayed:

2. Select Serial flasher config to conﬁgure the serial port, as shown below:

3. Conﬁgure the serial port, as shown below:

Espressif

/15

5. Compilation and Download

2017.01

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the ESP-WROVER-KIT and is the answer not in the manual?