Long Range Systems T74B232 Quick Setup & Operation

T74B232 & T74C232
RS232 Paging System Interface Transmitter
QUICK SETUP & OPERATION

Interface Description

The interface transmitter is designed to translate paging commands from a host computer
to signals understood by LRS Pagers

Keypad Installation

1. Unpack the system. Be sure the following items are found:
• Interface unit
• Computer serial interface cable
• 10-Vac wall adpter
• Antenna with right angle elbow
• Pager
2. Plug the 10-Volt power adapter into a wall outlet
3. Plug the power supply into the interface transmitter
4. Connect the antenna.
5. Connect the serial cable from the connector on the interface
transmitter to the serial port on the host computer
6. The unit is ready for operation
7. Refer to the operating instructions delivered with the inter-
face transmitter
ong Range Systems
Long Range Systems UK Ltd | Link House | Leek Road | Milton | Stoke on Trent | Staffordshire | ST2 7AH | 01782 537000
www.lrspagers.co.uk | www.pagers.co | www.hospitalpagers.co.uk
Interface Transmitter
1
AC Power Outlet
CONDOR
U
L U
LISTED L
C
10-V Power
Adapter
Antenna
Serial Interface Cable
T74B232 & T74C232 Quick Guide