Placement Around Load - Signode 4A1-114 Operation, Parts And Safety Manual

STRAP PLACEMENT AROUND LOAD
1. Place strap around load as shown in the illustrations.
HORIZONTAL STRAP SIDE LOAD
Failure to place the strap properly around the load or an unstable or shifted load could
result in a sudden loss of strap tension during tensioning. This could result in a sudden
loss of balance casing you to fall.
If the load corners are sharp use edge protectors.
Failure to follow the above could result in serious injury or death.
2. Thread the proper number of heavy duty seals on both straps, Contact your Signode Sales
Representative for recommendations. Bend the lower/inner strap backwards to hold seals in
place. Bend the upper/outer strap away from the load to permit insertion into the windlass of
tensioner.
VERTICAL STRAP SIDE LOAD
6
TOP STRAP LOAD