Signode 4A1-114 Operation, Parts And Safety Manual page 3

9. WARNING LABEL 177896
The warning label shown below is on the tool handle. If this label becomes damaged, replace
it immediately. Ensure that a plastic shrink tube sleeve us applied over the label. Contact
your Signode Sales Representative if you have any questions.
10. CUTTING TENSIONED STRAP
A. Keep all bystanders at a safe distance, away from the danger zone (shaded area) and
possible flying strap ends.
B. Stand to one side of the strap being cut - outside of the danger zone (shaded area).
C. Cut the strap.
3