Siemens IFP1900 INOX PRO Compact Operating Instructions page 6

Product description
Features
Properties of the IFP1900 INOX PRO:
• Enclosure material:
• Sealing material:
• Front membrane:
• Degree of protection:
• Front operator controls: 2 illuminated pushbuttons, 1 EMERGENCY OFF button, wired to
• Mechanical interface:
Internal plug-in terminal strip only for devices with operator controls, pin assignment of the
1
internal terminal strip, see section "Pin assignment of the internal terminal strip (Page 31)"
Scope of delivery
● 1 x IFP1900 INOX PRO
● 1 x 2-pin connecting terminal for the 24 V DC power supply
● 1 x 20-pin connecting terminal, matching the internal 20-pin terminal strip of the device
● 1 x seal for mechanical interface
Accessories
Note
Accessories are intended only for the INOX devices listed above and not in general for other
PRO devices (standard).
Mounting kit for stand mounting
A mounting kit is available for pedestal mounting of the device. Mounting kit contents:
● 1 stainless steel tube with flange: Length 500 mm, outer diameter 48.3 mm, inner
diameter 40 mm.
The mechanical interface of the stainless steel tube with flange fits the mechanical
interface of the device.
● 4 hexagon screws M5×25 made of stainless steel
● 1 flat seal
Article number 6AV7675-1GB00-0AA0
6
INOX stainless steel, material number 1.4301
FPM (fluorinated rubber)
Polyester-based
IP66 all-round
internal terminal strip
1
For stand mounting, analogous for support arm mounting
Compact Operating Instructions, 07/2019, A5E35751632-AC
IFP1900 INOX PRO