Environmental Conditions - Siemens IFP1900 INOX PRO Compact Operating Instructions

Specifications
6.4 Technical specifications
6.4.2

Environmental conditions

Climatic ambient conditions
Temperature, tested in accordance with IEC 60068-2-1, IEC 60068-2-2
•
•
•
•
Relative humidity, tested in accordance with IEC 60068-2-78, IEC 60068-2-30
•
•
Air pressure, in accordance with IEC 60068-2-13
•
•
Mechanical ambient conditions
Vibration, tested according to IEC 60068-2-6
•
•
Shock resistance, tested in accordance with IEC 60068-2-27, IEC 60068-2-29
•
•
Protection against foreign objects and water
The device meets the requirements according to IEC 60529 and UL50.
Degree of protection
All-round
The degrees of protection can only be guaranteed if the seals are completely flush at the
mechanical interfaces and the associated covers are closed.
The IP66 degree of protection is not covered by the UL approval and was not tested as part
of the UL approval.
Degree of pollution / overvoltage category according to IEC 61131
● Degree of pollution 2
● Overvoltage category II
30
Temperature gradient in operation
Ambient temperature in operation
Temperature during storage/transport
Storage/transport, gradient
Operation
Storage/transport
1140 to 795 hPa, corresponds to an elevation of -1000 to 2000 m
Operation
1140 to 660 hPa, corresponds to an elevation of -1000 to 3500 m
Storage/transport
10 to 58 Hz: 0.15 mm
Operation
58 to 500 Hz: 10 m/s
5 to 8.5 Hz: 7 mm
Storage/transport
8.5 to 500 Hz: 10 m/s
150 m/s2, 11 ms, 100 shocks per axis
Operation
250 m/s2, 6 ms, 1000 shocks per axis
Storage/transport
Explanation
When mounted:
•
•
Max. 10 °C/h, no condensation
0 to 45 °C
-20 to +60 °C
Max. 20 °C/h, no condensation
5 to 85% at 30 °C, no condensation
5 to 95% at 25/55 °C, no condensation
, 10 cycles
2
2
IP66 according to IEC 60529
Enclosure Type 4X (indoor use only) according to UL50
Compact Operating Instructions, 07/2019, A5E35751632-AC
IFP1900 INOX PRO