Installer Setting -How To Enter Installer Setting Mode - LG LZ-H025GBA4 Installation Manual

Installation

Installer setting -How to enter installer setting mode

CAUTION
!
Installer setting is a mode to set the detailed functions of remote control.
If the installer setting mode is set improperly, it may cause a break down, injury, or property damage.
The installation requires an expertise and must be performed by one of our service centers or expert
installer providers.
The person who performed an installation takes responsibility for any troubles associated with the
installation, and in this case, service will be charged.
• Some items in the menu may not be displayed depending on the product functions, or
have different name in the menu.
18 Ventilator
1
Keep pressing(over 3 seconds) the
button repeatedly to scroll to the
required function as described in the
Installer setting code table below.
Use the arrow buttons to select the
required value, and then press the
button. You can leave the installer menu
L
by pressing
Alternatively, the installer mode will cease
automatically if no buttons have been
pressed for about 25 seconds.
Once entered the installer settings
2
mode, it displays the programmable data
values in the lower right of LCD screen.
B
K
.
Code value Set value