Installation Instructions; Installer Setting - How To Enter Installer Setting Mode - LG JTNQ24GPLE5 Owner's Manual

INSTALLATION INSTRUCTIONS

Installer Setting - How to enter installer setting mode

!
CAUTION
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it can cause problems to the product, user
injury or property damage. This must be set by an certificated installer, and any installation
or change that is carried out by a non-certificated person should be responsible for the re-
sults. In this case, free service cannot be provided.
INSTALLATION INSTRUCTIONS
1
. With the JET COOL button pressed,
press the RESET button.
2
. By using the TEMPERATURE SETTING but-
ton, set function code and setting value.
(Please refer the Installer Setting Code
Table.)
3
. Press the ON/OFF button toward the in-
door unit 1 time.
4
. Reset the remote controller to use the gen-
eral operation mode.
Refer to the Installer Setting Code Table
on the next page.
13