Light Alarm 1 (No Sound, Just Light); Activate/Deactivate Light Alarm 1; Snooze Light Alarm 1; Sound Alarm 2 (Beep Or Nature Sounds) - La Crosse C83117 Faq Manual

Light Alarm 1 (no sound, just light)

Note: LIGHT ALARM 1 is a light only alarm. There is no sound.
Note: SOUND ALARM 2 offers a beep or nature sounds for your alarm.
1. Hold the LIGHT ALARM 1 button for 3 seconds to enter alarm time set mode. The alarm
hour will flash.
2. Press the + or - buttons to set alarm hour.
3. Press the LIGHT ALARM 1 button to confirm and move to the minutes. The alarm
minutes will flash.
4. Press the + or - buttons to set the minutes.
5. Press and release the LIGHT ALARM 1 button to exit settings.
o When alarm time is reached the White Mood light will begin to glow and increase
intensity over a 5 minute period to 99%. It will stay at 99% for another 5 minutes
unless turned off.
o When the alarm is turned off the alarm icon will disappear.

Activate/Deactivate Light Alarm 1

Alarms are active when alarm time is set.
Press the LIGHT ALARM 1 button.
1.
Alarm time will show for 3 seconds.
2.
Press the LIGHT ALARM 1 button to deactivate or activate that specific alarm.
3.
Alarm icon will show when active and disappear when deactivated.
4.
Alarm icon will flash when alarm sounds.
5.
When alarm time is reached, press any button except for SNOOZE/LIGHT to deactivate
6.
alarm for one day.

Snooze Light Alarm 1

o When alarm lights or sounds, press SNOOZE/LIGHT button to stop sound or light, and
activate SNOOZE function. SNOOZE - duration will show in date area. Appropriate alarm
icon will flash.
o During snooze count down, press any button except for SNOOZE/LIGHT to exit snooze
count down.
o When snooze alarm sounds, SNOOZE -- - duration ''00 00'' will flash, press any button
(except SNOOZE/LIGHT) to stop alarm and exit snooze function. Press SNOOZE/LIGHT
to snooze again.

Sound Alarm 2 (beep or nature sounds)

Note: LIGHT ALARM 1 is a light only alarm. There is no sound.
Note: SOUND ALARM 2 offers a beep or nature sounds for your alarm.
Set Sound Alarm:
1. Hold SOUND ALARM 2 for 3 seconds to enter alarm settings. Alarm hour will flash.
2. Press the + or - buttons to adjust hours.
3. Press the SOUND ALARM 2 button to confirm and move to minutes. Alarm minutes will
flash.
La Crosse Technology, Ltd Page 5