Usb Charge Port; Will Not Charge My Phone - La Crosse C83117 Faq Manual

Select Nature Sound:
o Press SOUND button to hear Nature Sounds.
o Press SELECT button to change Nature Sound selection while listening to the sounds.
or
o Press SELECT button to change Nature Sound selection without listening to sounds.
The selected sound will have a double ring. Example: Backwoods is selected on the
image below.
Play Nature Sounds:
o Press the SOUND button to listen to Nature Sound continually.
o Change volume with the + or - buttons.
o Press the SELECT button to change Nature Sounds.
o Press SOUND button again to turn off Nature Sounds.
Select Nature Sound and Set Timer:
1. Press the SOUND button to turn sound on.
2. Press and release TIMER button to select amount of time for nature sound to play
(15, 30, 45, 60, 75, 90, OFF).
3. When selection is made timer will start.
4. While a Timer is in progress the seconds area will display the time left and will count
down to zero.
1. When the Timer reaches zero, the sound will stop and the seconds area will show 0 for
3 seconds then return to showing seconds.
o Press the SELECT button to change nature sound.
o Press and release the SOUND button at any time to turn off sound and timer.
Note: Press the timer button until the display says TIMER OFF to exit timer without turning
off the sound
Note: Press and release TIMER button any time to adjust the time.
Note: Press and release the SOUND button at any time to turn off sound and timer.

USB Charge Port

There is a 1 Amp USB charging port on the side of the clock. The included power adapter
must be in use to charge a device with your cable.
• Connect your external device's USB charging cable (not included) to the USB charging
port.
• Charging times will vary.
• USB Power Output: 1A maximum current.
Charge 1A devices or devices that are self-regulating.
•
USB Output: 1 Amp output

Will not Charge my Phone

• Be sure your phone charge cord is attached correctly.
La Crosse Technology, Ltd Page 7