Table of Contents
Advertisement
Power cord
•
The design of this alarm clock is to use a power cord (5-volt) as primary power source.
•
When operating with the power cord, the
•
Replacement Power Cord: Look on the back of the clock for the appropriate Power
cord number. It is important to use the correct power cord on all electronic devices.
•
When operating on power cord, batteries are optional and are not required in the
alarm clock.
•
The
backlight
will operate at five levels of intensity (including OFF) at your discretion
when using the power cable.
•
The
mood light
will operate at five levels of intensity (including OFF) at your discretion
when using the power cable.
Backup Batteries
•
The clock comes with s CR2032 button cell battery to back up time and date.
Alarm Clock Factory Restart
Explanation: The factory restart returns the alarm clock to an "out-of-the-box" state and
often resolves an issue.
Factory Restart:
1. Remove all power (battery and power cord) from the alarm clock.
2. Press one of the buttons on the alarm clock at least 20 times to clear all memory.
3. Verify that the alarm clock is blank before proceeding.
4. Leave without power for 15 minutes (very important).
5. Insert the power cord into the wall outlet then into the alarm clock.
6. Set time, date, etc.
Language
•
This clock will show the weekday and directions in English (default) or Spanish
(Española).
•
Use the
program menu
Turn off Beep sound with button press
•
Use the
program menu
pressed.
12-Hour Time Format
•
This clock only has 12-hour time format.
La Crosse Technology, Ltd
backlight
to select language.
to select BEEP OFF. The clock will not beep when a button is
can be on continually.
Page 2
Hide quick links:
Advertisement
Table of Contents
