JVC UX-P550 Service Manual page 19

Hide thumbs Also See for UX-P550:

www.freeservicemanuals.info

3.1.15 Removing the switch board

(See Figs.25 and 26)

• Prior to performing the following procedures, remove the side

panels L/R and front panel assembly.

(1) From the front side of the front panel assembly, pull out the

volume knob in to the direction of the arrow. (See Fig.25.)

(2) From the inside of the front panel assembly, remove the

ten screws U attaching the switch board. (See Fig.26.)

(3) Take out the switch board from the front panel assembly

and disconnect the card wire from the connector

the switch board. (See Fig.26.)

Reference:

When attaching the switch board, align the projections p of the

front panel assembly in the holes of the switch board. (See

Fig.26.)

CN760

Digitized in Heiloo Netherlands

Front panel assembly

Volume knob

Fig.25

CN760

Card wire

Switch board

Fig.26

2/4/2018

(No.MB227)1-19

Table of Contents