JVC UX-P550 Service Manual page 18

Hide thumbs Also See for UX-P550:

www.freeservicemanuals.info

3.1.14 Removing the FL board

(See Fig.24)

• Prior to performing the following procedures, remove the side

panels L/R and front panel assembly.

(1) From the inside of the front panel assembly, remove the

four screws T attaching the FL board.

(2) Take out the FL board from the front panel assembly and

disconnect the card wire from the connector

FL board.

Reference:

When attaching the FL board, align the projections n of the

front panel assembly in the holes of the FL board.

1-18 (No.MB227)

CN751

on the

CN751

Card

wire

Digitized in Heiloo Netherlands

FL board

Front panel assembly

Fig.24

2/4/2018

Table of Contents