Telefunken TFL65FHD200BC Operating Instructions Manual page 49

• To access and play shared files, you must select the
Media Browser. Press the Menu button and select
Media Browser. Press OK to continue. Select the
desired file type and press OK. You must always
use the Media Browser screen to access and play
shared network files.
• PC/HDD/Media Player or any other devices that are
DLNA 1.5 compatible should be used with a wired
connection for higher playback quality.
To configure wired settings please refer to the
Network Settings section in the Settings menu.
• You might be able to connect your TV to your LAN
depending on your network's configuration. In such
a case, use an ethernet cable to connect your TV
directly to the network wall outlet.
Configuring Wired Device Settings
Network Type
The Network type can be selected as Wired or Wireless,
in accordance with the active connection to the TV set.
Select this as "Wired" if you are connecting via an
ethernet.
Configuration Status
This section displays the status of the connection.
IP Address
If an active connection is available, the IP address will
be displayed on this section. If you want to configure
an IP address preferences, press the GREEN button
and switch to the advanced mode.
Configuring Wired Network Settings in
Advanced Mode
After pressing the GREEN button, the "Advanced
mode" will be available. While in Advanced Mode,
press the RED button to edit settings. When
finished, press OK to save, Press RETURN/BACK
to cancel.
Wireless Connectivity
To Connect to a Wireless Network
• To make your modem's SSID visible, you should
change your SSID settings via the modem's
software. The TV cannot connect to the networks
with a hidden SSID.
To Connect to a wireless LAN, you should
perform the following steps:
1. Ensure that Nero Media Home software is
installed to your PC (for DLNA function).
2. To configure your wireless settings please refer
to the Network settings section in this manual.
• A Wireless-N router (IEEE 802.11a/b/g/n) with
simultaneous 2.4 and 5 GHz bands is designed
to increase bandwidth. These are optimized for
Wireless LAN
smoother and faster HD video streaming, file
adaptor
transfers and wireless gaming.
• Use a LAN connection for quicker file sharing
USB inputs
rear left side
between other devices like computers.
of the TV
• The frequency and channel differ depending on the
area.
• The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the configuration of these
products, the radio wave conditions, the line traffic
and the products that you use. The transmission
may also be cut off or may get disconnected
depending on the radio wave conditions, DECT
phones or any other WiFi 11b appliances. The
standard values of the transmission speed are
the theoretical maximum values for the wireless
standards. They are not the actual speeds of data
transmission.
• The location where the transmission is most effective
differs depending on the usage environment.
• The Wireless feature of the TV supports 802.11 a,b,g
& n type modems. It is highly recommended that you
should use the IEEE 802.11n communication protocol
in order to avoid any possible problems while watching
videos.
English - 47 -
Broadband
ISP
connection