Topcom HB 10M00 User Manual page 7

TOPCOM HB 10M00
7.1 TO PAIR THE WATCH WITH THE CHEST BELT
AND GPS POD
The chest belt and GPS pod is normally paired with the watch when bought.
If battery is replaced or after a reset the chest belt/GPS pod has to be paired
again.
Current time mode
Pairing completed
During the pairing:
• The heart rate chest strap must be worn on the chest or press the two
contacts (i.e. heart rate signal is sampling).
• The GPS pod must be turned on (see "10.4.1 Turning it on/off").
Note:
• The product has been paired before the shipment.
• For some instance, the chest strap and GPS pod can be paired with the
watch again by the steps mentioned above.
8 TIMEKEEPING - SENSOR MODE MAIN MENU
There are 2 menu's you can enter by briefly pressing the [ESC] key:
timekeeping menu and sensor menu. To scroll between both menu's press
the [ESC] key.
Once you are in the selected menu you can scroll with the up/down [ ]/[ ]
keys between the other modes.
hold [M]
[M]
chest strap
[ ]
[M]
[ ]
GPS pod
7