Topcom HB 10M00 User Manual page 48

10.2.2 By batteries
1. Push the battery door
outward in compliance
with the arrows marked
on the door.
Note:
• Remove the batteries from the charger when the charger will not be used
for a long time.
• If both batteries and USB are supplies, USB will be selected
automatically as the power source.
10.3 WEARING THE GPS POD
On running shoe:
Velcro
1. Thread the GPS pod
bracket through the lace
with the handle upward.
48
2. Insert 4 'AAA' or UM-4,
battery (alkaline battery
recommended, not included)
into the charger in compliance
with the polarity marked on the
case.
2. Ensure the bracket is flat
and smoothly bedded
down on the shoe's
tongue.
TOPCOM HB 10M00
3. Put the battery door
back. Push the battery
door backward until a
'click' is heard.
Velcro
3. Lodge the GPS pod in
the bracket with the button
upward (to maximize the
exposure of the GPS
antenna to the sky). A click
will be heard.