Topcom HB 10M00 User Manual page 39

TOPCOM HB 10M00
GPS
signal
Note:
• When enter user mode, the user function (sensor) will be activated
automatically after 5 seconds. Which can be activated manually too, see
"8.2.8 To start/stop the sensor, timer and logbook".
• When the user function (sensor) is activated, the watch will aggregate
the readings of the exercise into the current session.
• The data of the current session can be saved (into the 'daily record') or
reviewed by the user mode function menu.
• The 'daily record' can be reviewed by the user mode function menu too.
The watch can store up to 10 daily records.
• See "8.2.9 To reset the screen, session and timer" to reset the current
session.
See chapter "10.3 Wearing the GPS pod" for lacing the GPS pod
on your shoe and the precautions of using GPS pod before the
measurement. See "Function menu 4: View" below for the
details about function selection.
5
seconds
radio
frequency
signal
watch
sensor activated
radio
frequency
signal
reading captured
heart
beat
signal
39