Topcom Twintalker 9000 User Manual page 9

13.2 Turning the Unit ON/OFF
• To activate; press and hold
current channel, CTCSS code and time.
• To switch off; press and hold
displayed.
13.3 Adjusting Speaker Volume
The Speaker Volume can be adjusted using
level is displayed on the LCD.
13.4 Receiving a Signal
The unit is continuously in the RECEIVE mode when the unit is ON and not
transmitting. When you receive a signal on the current channel, the RX icon is
displayed.
13.5 Transmitting a Signal
• Press and hold
• Hold the unit in a vertical position with the MICROPHONE 10 cm from the
mouth and speak into the microphone.
• Release
13.6 Changing Channels
The PMR has 8 available channels.
To change channels:
• Press
• Press
• Press
• To confirm and shift to the next option, press
NOTE: Any PMR set on the same channel can receive and listen to the
conversation, also when the other use a CTCSS code.
Topcom Twintalker 9000
. The unit will "beep" and the LCD Screen will display the
again. The unit will "beep" and only the time is
In order for other people to receive your transmission, they
must be set on the same channel and CTCSS code
to TRANSMIT.
PTT
when you have finished transmitting.
PTT
once, the current channel number flashes on the LCD Screen.
or to change the channel.
to confirm your selection and return to the NORMAL mode.
PTT
Topcom Twintalker 9000
and . The Speaker Volume
.
9