Waeco MSH-45 Installation And Operating Instructions Manual page 14

manual msh-45 14.10.2003 8:14 Uhr Seite 14
Safety and installation instructions
Caution! To check the voltage in
electric cables, use only a diode test test lamp
lamp or a voltmeter. Test lamps which
light up take too much current and
the vehicle electronics may be dama-
ged.
diode test lamp
or
voltmeter
Caution! To avoid damage, always
ensure that there is enough clearance
for the drill bit to emerge. Every drill
hole must be deburred and treated
with a rust proofing agent.
4