Makita TW0350 Technical Information page 6

R
epair
< 7 > Replacing electrical parts in the handle
( 1 ) Unscrew 2 pcs. of tapping screw 4x18 and remove handle cover. Then, the electrical parts
(switch, line coil, resister, etc.) can be replaced. See Fig.14.
Tapping screw 4x18
34 Sponge
37 Switch
38 Line coil
39 Resister
40 Terminal block
42 Noise suppressor
48 Power supply cord
49 Cord guard
( 2 ) Put the sponge into the position as illustrated in Fig. 15.
( 3 ) Inflect the insulated terminals as illustrated in Fig. 16,
when connecting with switch terminals.
Switch
Handle cover.
Tapping screw 4x18
Fig.16
37
34
38
42
Strain relief
Fig.14
P 6 / 8
39
40
48
49
Handle cover
If sponge is used, put it
in the illustrated place.
Fig.15