SPECIFICATIONS Model TW0350 Capacities Standard bolt M12 - M22 High tensile bolt M12 - M16 Square drive 12.7 mm No load speed (min 2,000 Impacts per minute 2,000 Max. fastening torque 350 N·m Overall length 283 mm Net weight 3.0 kg Safety class •...
10. If the cord is damaged, have it replaced by the EC Declaration of Conformity manufacturer or his agent in order to avoid a safety hazard. For European countries only Personal safety The EC declaration of conformity is included as Annex A Stay alert, watch what you are doing and use to this instruction manual.
Power tool use and care Always be sure you have a firm footing. Be sure no one is below when using the tool in Do not force the power tool. Use the correct high locations. power tool for your application. The correct power tool will do the job better and safer at the The proper fastening torque may differ rate for which it was designed.
Move the O-ring out of the groove in the socket and ASSEMBLY remove the pin from the socket. Fit the socket onto the anvil of the tool so that the hole in the socket is aligned with the hole in the anvil. Insert the pin through the hole CAUTION: in the socket and anvil.
To maintain product SAFETY and RELIABILITY, repairs, • Even though the diameters of bolts are the any other maintenance or adjustment should be per- same, the proper fastening torque will differ formed by Makita Authorized Service Centers, always according to the torque coefficient, the class using Makita replacement parts. of bolt and the bolt length. 6 ENGLISH...
The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center. • Sockets •...