Table of Contents
Advertisement
Main unit settings
Display / Buzzer Adjustment
You can change the settings of LCD brightness, LCD contrast, alarm buzzer, or button buzzer as follows.
Selection of the item to be set
Select the item to be set.
1 From the settings menu, select "001 LCD/Buzzer
Setup" (☞ Page 22 Steps 1 to 2)
2 Press
The display brightness adjustment screen is displayed.
Display brightness adjustment
Adjust the brightness of the display.
1 Select "LCD Bright" from the menu
A numerical value indicating the current brightness setting
and a brightness indicating bar are displayed.
Initial value: 11
2 Press
The display brightness adjustment screen is displayed.
3 Adjust the brightness using
The display becomes bright when the numerical value in
becomes larger, and becomes darker when the
numerical value in
becomes smaller.
Setting range: 1 to 16
(continued)
or
23
3 Press
or
and select the item to be set
Each time
or
is pressed, the display screen
changes successively in the sequence of - the brightness
setting menu → contrast setting menu → alarm setting
menu → button operation sound setting menu.
4 Select the setting item that has to be adjusted, and
press
4 Press
The settings confirmation screen is displayed.
5 Press
The settings registration screen is displayed for a few
seconds.
After that, the set value is stored, and the screen returns to
that of Step 1.
Note:
• It is also possible to increase or decrease the
numerical value using also
keys.
Advertisement
Table of Contents
