Before Operation
Switching ON the Power
1 Insert the power supply plug of the AC adapter into
a 100V AC 50Hz / 60Hz power socket
→ The [Operation] indicator lights up, the software version
and the login awaiting screen are displayed successively
on the display.
Software version display
(for a few seconds)
Login awaiting screen
Switching OFF the Power
1 Log out
For the method of operation, see "Logging out" of "First-time
Setup" (☞ Page 18)
Flow of Basic Operations
First-time Setup
This is the setting required after the settings of the main unit
are reset to the initial state when using the main unit for the
first time, or when "All Reset" (☞ Page 43) is carried out.
Switch ON the power.
First-time Setup
Initial registration
Login (administrator)
Main unit settings for operation
Normal operation after login
(continued)
2 When using the main unit for the first time, or when
"All Reset" is carried out, the initial registration
start screen is displayed after the software version
is displayed
Carry out "Initial registration" of "First-time Setup".
(☞ Page 16)
2 Remove the power supply plug from the power
supply socket
→ When the power supply goes OFF, the [Operation]
indicator goes OFF.
Normal operation
These are the operations for normal operation of this
equipment.
Switch ON the power.
Normal operation
Operation
Switch OFF the power
15
Login
Changing the main
unit settings
Logout