Xylem ebro EBI IF 100 Firmware Update page 2

Internet / File
3
A dialog informs you about the progress of the firmware
update.
!
During update process you should not start any other
activities on your PC or unplug the device!
4
As soon as the update is finished, a new window
will open automatically.
Click on OK to finish the firmware update.
Possible Error Messages
Possible cause:
The firmware does not match
the interface.
Bugfixing:
Select matching device and firmware and
re-start the update.
Firmware update
EBI IF 100 / 150 / 200 / 300 / 400
EBI 300 / 310
5
Possible cause:
You have worked with the PC during
the update.
Bugfixing:
Disconnect and then re-connect the
device.
The update has been completed successfully.
on „OK" to close the window.
Possible cause:
You have worked on the PC during
the update.
Bugfixing:
Disconnect and then re-connect the
device. Re-start the updater.