Safety Information; Package Contents - VWR International DIGITRATE PRO Series Instruction Manual

DIGITRATE PRO

Safety Information

Careful safety precautions must apply when dispensing corrosive, radioactive or hazardous chemicals.
When using the instrument, take into consideration the chemical compatibility of the materials in
•
contact with the liquid.
Always check the Digitrate Pro for leaks. Make sure that the inlet tube (14) and FEP dispense tube (12)
•
are firmly in position before starting to use the instrument.
Never carry the instrument while holding onto its dispensing barrel or electronic head (2). Always
•
support the bottle with one hand under its reservoir and the other hand around the threaded platform
base (10) of the dispenser in order to stabilize the unit.
Avoid contact with the FEP dispense tube nozzle (12).
•
When dispensing make sure that anti-drip valve is open (11).
•
Use only original spare parts and original accessories (See Page 12 and 13).
•
If in doubt, consult your safety officer.
•

Package Contents

Digitrate Pro titrator
•
Three adaptors 33 mm, 38 mm and 45 mm (See Page 12).
•
PTFE inlet tube (See Pages 11 and 13).
•
Note
Refer to pages 10 and 11 for diagram references.
4
|
VWR INSTRUCTION MANUAL
|
EN