Homepilot® Leds - RADEMACHER HomePilot Commissioning Instruction Manual

i
4.1 HomePilot® LEDs
Symbol
* Disconnect the HomePilot® from the mains power for approx. 30 seconds
and then reboot it. Consult our service department if the problem has
not been resolved, see page 32.
Name Status
green
DuoFern
flashing
green
green
Z-Wave
flashing
green
Error red
WLAN green
flashing
orange
Power
green
Description
The DuoFern radio system
is active, the DuoFern stick
has been detected.
An update is
in process, see page 28.
The Z-Wave radio system
is active, the Z-Wave stick
has been detected
An update is
in process, see page 28.
An error has occurred. *
Connection has been
established.
Power-up phase - the
HomePilot® is starting up.
The HomePilot® is
ready for use.
EN
9