Weider LX7 User Manual page 15

ATTACHING WEIGHTS TO THE WEIGHT CARRIAGE
To use the Lat Tower (47), slide the desired amount of
weight onto each side of the weight tube on the Weight
Carriage (48). Make sure there is an equal amount of
weight on each side of the Weight Carriage. Secure the
weights with the Weight Clips (41).
WARNING: Do not place more than 150 pounds on
the weight carriage.
ATTACHING AND REMOVING THE LAT TOWER
For some exercises, the Lat Tower (47) must be attached
to the weight bench.
Insert the Lat Tower (47) into the indicated hole in the
Front Leg (2). Align the holes in the Front Leg and the Lat
Tower. Secure the Lat Tower with the Adjustment Knob
(16). Make sure you fully tighten the Adjustment
Knob.
To remove the Lat Tower (47), first remove the Lat Bar as
described below. Then remove the Adjustment Knob (16)
and pull the Lat Tower out of the Front Leg.
When the Lat Tower (47) is not in use, store it away from
the weight bench so that it does not interfere with your
exercise program.
ATTACHING THE LAT BAR TO THE LAT TOWER
To use the Lat Tower (47), attach the Lat Bar (53) to the
Cable (50) with a Cable Clip (52).
All manuals and user guides at all-guides.com
15
41
48
Weight
47
2
16
47
47
Weight
Tube
41
50
52
53