After Use; Cleaning And Maintenance - Fakir PRETTY Operating Instructions Manual

ATTENTION!
If you leave your work area, switch off
the appliance.

After Use

WARNING!
Follow the steps below as soon as you
stop vacuum cleaning. Never leave the
appliance unattended.
• Press the foot button "On/Off" to switch off the
vacuum cleaner.
• Remove the plug from the mains socket.
• Press the foot button "cable rewind" to reel in
the cable.
Gently guide the cable with your hand until the
cable has been completely wound.
NOTICE!
Only use original Fakir filters.
This is the only way to ensure that the
excellent filter properties of the vacuum
cleaner are utilised.
PRETTY

Cleaning and Maintenance:

Replacing the dust bag:
Turn off and unplug the appliance before
cleaning.
Replacing the dust bag:
If the indicator shows all red, replace the dust
bag even if it is not totally full.
Lift the latch on the front side and open the
appliance cover.
Remove the dust bag by pressing the latch of the
dust bag.
Place the new dust bag on the slot below - (SEE
THE FIGURE) - and then pull the dust bag
towards the latch, and ensure that the dust bag
is placed under the latch by expanding the latch
backward.
To place the dust bag, fold the dust bag following
the folding sign. Eventually, you will prevent the
dust bag from getting jammed between the cover
and the body.
If you do not fit the dust bag properly, the dust
bag cover will not be closed. In this case, do not
force the cover to close and ensure that the dust
bag is fitted properly.
WARNING!
Do not wash the dust bag.
GB
17