Kia Seltos 2019 Owner's Manual page 48

Safety features of your vehicle
To raise the height adjuster, pull it
up (1).
To lower it, push it down (3) while
pressing the height adjuster but
ton (2).
Release the button to lock the
anchor into position. Try sliding the
height adjuster to make sure that it
has locked into position.
Improperly positioned seat belts can
cause serious injuries in an accident.
WARNING
Verify the shoulder belt anchor is
locked into position at the appro
priate height. Never position the
shoulder belt across your neck or
face.
Failure to replace seat belts after
an accident could leave you with
damaged seat belts that will not
provide protection in the event of
another collision leading to per
sonal injury or death. Replace
your seat belts after being in an
accident as soon as possible.
3 22
Fastening the rear center seat belt
(lap belt):
1. To fasten a 2-point static type
belt, insert the metal tab (1) into
the locking buckle (2). There will
be an audible "click" when the tab
locks into the buckle.
OSP2I039047
2. Check to make sure the belt is
properly locked and that the belt
is not twisted.
With a 2-point static type seat
belt, the length must be adjusted
manually so it fits snugly around
your body.
3. Fasten the belt and pull on the
loose end to tighten.
OSP2I039048
Seat belts