Kia Seltos 2019 Owner's Manual page 452

Maintenance
Insects, tar, tree sap, bird droppings,
industrial pollution and similar
deposits can damage your vehicle's
finish if not removed immediately.
Even prompt washing with plain
water may not completely remove
all these deposits. A mild soap, safe
for use on painted surfaces, may be
used.
After washing, rinse the vehicle
thoroughly with lukewarm or cold
water. Do not allow soap to dry on
the finish.
After washing the vehicle, test the
brakes while driving slowly to see if
they have been affected by water. If
braking performance is impaired,
dry the brakes by applying them
lightly while maintaining a slow for
ward speed.
CAUTION
Do not use strong soap, chemical
detergents or hot water, and do
not wash the vehicle in direct sun
light or when the body of the
vehicle is warm.
Be careful when washing the side
windows of your vehicle, espe
cially with high-pressure water.
Water may leak through the win
dows and wet the interior.
To prevent damage to the plastic
parts and lamps, do not clean with
chemical solvents or strong
detergents.
8 86
WARNING
After washing the vehicle, test the
brakes while driving slowly to see if
they have been affected by water. If
braking performance is impaired,
dry the brakes by applying them
lightly while maintaining a slow for
ward speed.
High-pressure washing
When using high-pressure washers,
make sure to maintain sufficient
distance from the vehicle.
Insufficient clearance or excessive
pressure can lead to component
damage or water penetration.
Do not spray the camera, sensors or
its surrounding area directly with a
high pressure washer. Shock applied
from high pressure water may
cause the device to not operate
normally.
Do not bring the nozzle tip close to
boots (rubber or plastic covers) or
connectors as they may be dam
aged if they come into contact with
high pressure water.
Appearance care