Kia Seltos 2019 Owner's Manual page 41

Safety features of your vehicle
To unfold the rear seat
WARNING
Uprighting seat
When you return the seatback to its
upright position, hold the seatback
and return it slowly. If the seatback
is returned without holding it, the
back of the seat could spring for
ward resulting in injury caused by
being struck by the seatback.
1. Lift and pull the seatback back
ward and be careful not to be
located the seat belt between the
rear seat and vehicle body. Pull
the seatback firmly until it clicks
into place.
Type A
OSP2I039021
Type B
OSP2I039053
2. Make sure the seatback is locked
in place. When you return the
seatback to its upright position,
always be sure it has locked into
position by pushing on the top of
the seatback.
(For type A) If you can not see the
red line at the bottom of folding
lever, it means the seatback is
locked completely.
3. Return the rear seat belt to the
proper position.
4. When the seatback is completely
installed, check the seatback fold
ing lever again.
Seat
3
3 15