1. Limited warranty Products manufactured by GRUNDFOS PUMPS CORPORATION CONTENTS (Grundfos) are warranted to the original user only to be free of Page defects in material and workmanship for a period of 24 months from date of installation, but not more than 30 months from date Limited warranty of manufacture.
Warning UL Electrical The surface of the product may be so hot that 1 x 230 V CMBE models: UL Listing for Packaged Pumping it may cause burns or personal injury. System If these safety instructions are not observed, it...
The CMBE is designed for domestic and commercial constant pressure applications. 4.2.1 Pumped liquids The CMBE is designed for pumping water and other thin, non-aggressive and non-explosive liquids, not containing solid particles or fibers. If the pump has been used for dirty liquids;...
C: High-efficiency motor with frequency converter (IP55) Mains cable and plug B: U.S. plug NEMA 5-15 (1 x 115 V m, 60 Hz, CMBE) I: Without cable and plug, (1 x 200 - 240 V, 60 Hz CMBE) Controller D: Integrated frequency converter E: Thread type and size 4.3.2 Nameplate...
The cover must be sufficiently large to ensure that the motor is All electrical work should be performed by a not exposed to direct sunlight, rain or snow. Grundfos does not qualified electrician in accordance with the latest supply covers. We therefore recommend that you have a cover edition of the National Electrical Code, local built for the specific application.
If the motor is supplied through an IT network, a Note Note ELCB dedicated IT network motor should be used. Contact Grundfos. (GFCI) 1 x 200-240 V models When an earth leakage circuit breaker or ground fault circuit interrupter is selected, the total The wires in the motor terminal box must be as short as possible.
• The temperature of the cooling air must not exceed 50 °C (122 7.2 Ambient temperature °F) for 1x230V or 45 °C (113 °F) for 1x115V CMBE pumps. 7.2.1 Ambient temperature during storage and transportation • Keep cooling fins and fan blades clean.
, it can only be Light fields for indication of setpoint. restarted by pressing The pump can also be stopped with the R100, Grundfos GO Changes the setpoint. Remote or via a digital input set to "External stop". Enables radio communication with the 9.1.3 Resetting of alarms and warnings...
10. Grundfos Eye The operating condition of the motor is indicated by the Grundfos Eye on the motor control panel. See fig. 13, pos. A. Fig. 13 Grundfos Eye Grundfos Eye Indication Description Power off. No lights on. Motor not running.
Need help?
Do you have a question about the CMBE and is the answer not in the manual?
Questions and answers