To Write And Send A Message - BT Synergy 3205 SMS User Manual

5980 BT Synergy 3205 UG [2-2]
44
If you have no unread messages
you can press
to the SMS menu.
To exit and return to idle mode at
any time, press
Using FasTxT
When using FasTxT, you will need to
look at the display when composing
messages. If the letter you require
is not displayed, press
toggle to the required letter.
Select Edit message – if you
decide to change the message.
Select Delete? – if you want to
delete the message.
All manuals and user guides at all-guides.com
23/3/04
BT Synergy 3205 SMS – Issue 2 – Edition 2 – 16.03.04 – 5980

To write and send a message

1. Press
as a short cut
2. Press
3. Press and hold
.
4. Key in your message, referring to the character map if
necessary. The number of available characters remaining
is shown in the bottom right hand corner of the display.
to
5. Press
Outbox
6. Enter the number you want using the keypad.
Press
Or
Press
display the name/number you want.
7. Press
shows
A copy of the message is kept in the Outbox.
2:10 pm Page 44
. Press again to select
to display New message
to select either standard or FasTxT.
to confirm the message. The display shows
then Send to? .
to delete an incorrect digit.
to display Phonebook
to confirm and send the message. The display
Sending SMS followed by
SMS Text Messaging
SMS
.
and press .
, then use or to
Message sent .