Lubrication
Using a light machine oil (20W) and the following guidelines, lubricate the bicycle:
Stem
Each year apply lubricant to the stem.
To apply lubricant to a direct-connect stem, adjustment of the headset bearings is
necessary. Only your dealer should do this.
To apply lubricant to a quill stem:
1. Remove the stem from the frame.
2. Clean the used grease from the stem.
3. Apply a thin layer of grease to the section of the stem-quill that will be put into the
frame. Also apply grease to the stem wedge.
4. Install the stem.
Seatpost
Each year, apply lubricant to seatpost. Use the procedure for your frame and seatpost
material:
Aluminum seatpost in a metal frame:
1. Decrease the tightness of the seatpost binder bolt, or release the quick-release, and
remove the seatpost from the frame.
2. Clean the used grease off the seatpost.
56